190357 Return Roller Small Belt W100F W120F W130F Milling Machine Conveyor Material Collecting Spare Part

The 190357 Return Roller Small Belt is the material collecting belt that sits at the return side of the conveyor on cold milling machines W100F, W120F and W130F. It picks up the milled asphalt or concrete leaving the milling drum and hands it over to the main conveyor belt, so the cutting chamber stays clear and the machine keeps working at full advance speed.

A worn or slipping collecting belt is one of the most common causes of material build-up in the drum housing, uneven milling depth and lost working hours on site. Replacing it with a correctly sized 190357 belt restores the original material flow, keeps belt tension stable and prevents secondary damage to the return roller and drive pulley.

• Direct fitment for W100F / W120F / W130F — built to the original 190357 outline, so it installs on the standard return roller without modification, shimming or re-drilling.
• Reliable material collecting performance — the belt profile carries milled material steadily from the drum to the main conveyor, reducing spillage and cleaning time.
• Wear resistant rubber body — abrasion resistant compound with fabric reinforcement, suited to continuous operation with hot, sharp milled material.
• Stable length and tension — dimensionally controlled during production, so the belt tracks straight on the return roller instead of running off the edge.
• Short machine downtime — stocked item, shipped in 7–10 working days, so a road construction contractor can plan the change inside a weekend or a night shift.

The belt is fitted on the return roller under the conveyor frame of W100F, W120F and W130F milling machines. It is consumed together with the return roller, the conveyor belt and the drum housing seal, so contractors usually replace the small collecting belt whenever the return roller surface is renewed or when milled material starts to accumulate under the conveyor.

• Packing: carton, pallet and wooden box for sea or air freight
• Lead time: 7–10 working days after payment
• Port: Shanghai; other Chinese ports on request
• Payment: T/T, L/C, Western Union

Please confirm the machine model and the part number 190357 when ordering. If you are unsure whether your W100F, W120F or W130F uses this collecting belt, send us a photo of the old belt and the machine serial number, and our technical team will check the fitment before shipment. Mixed orders with other milling machine spare parts can be consolidated into one container.

Tip: Always verify the part number against your machine serial number before placing an order to ensure correct fitment.