Bird Super Heater 2055043 Heating Rod 2055045 For AB340-3TV Screed Asphalt Paver

• Matched 2055043 and 2055045 set - both rod lengths for the AB340TV screed are supplied from the same production batch, so heat output across the plate stays even.
• Stainless tube with ceramic insulation - vibration from the tamper bar does not crack the insulation, which is the most common cause of earth leakage on screed heaters.
• Original plug-in terminal - the connector matches the factory wiring loom, so the rod drops in without cutting or re-terminating cables.
• 1.1 kg per rod - same weight and bend radius as the original part, keeping the retaining clamps and heat shield in place.
• Batch insulation test - every rod is megohm tested before packing, with the test record supplied with the shipment.

Replace the rod when the screed plate takes more than 20 minutes to reach working temperature, when one section of the plate stays cooler than the rest, or when the machine breaker trips as soon as the screed heater is switched on. Check the resistance of each rod before ordering and compare it with the value in the machine manual; a rod that reads open circuit will not heat regardless of the controller setting.

• Each rod is bagged with anti-rust film, seated in foam and packed in an export carton.
• Pallet or wooden box packing for LCL and full container loads.
• Megohm test record and outgoing inspection video supplied with every order.
• Online video support for wiring check and first heat-up.