Benit W2000 Milling Teeth M7-20 7mm Thicker Washer Road Milling Machine Picks 2800878 2642530

The W2000 milling teeth M7-20 is a replacement cutting pick for W2000 class cold milling machines. Compared with a standard pick, this version carries a 7 mm thicker washer at the base of the shank. That extra thickness enlarges the bearing face between the pick and the toolholder, so cutting force is distributed over a wider area instead of being concentrated on a thin ring of steel.

In daily operation this design keeps the tool seated more firmly in the holder. Vibration is reduced, the holder bore wears more slowly, and the pick stays aligned with the cutting circle for a longer part of its life. For fleets working long shifts on abrasive asphalt, that directly translates into fewer tool changes and less unplanned downtime.

• Reinforced 7 mm washer. The thicker shoulder absorbs impact pulses before they reach the holder bore, which slows ovalisation of the toolholder.
• Brazed carbide tip. The tungsten carbide insert is brazed under controlled temperature so the joint holds through thermal cycling on hot pavement.
• Hardened steel body. The shank is machined to a tight diameter tolerance so the pick locks into the retainer clip without play.
• Stable cutting circle. Consistent geometry keeps the pick rotating properly, which lets the tip self-sharpen instead of flattening on one side.
• Simple interchange. Drop-in replacement for the common 2800878, 2642530 and 2642532 references, so no change to the drum setup is needed.

• Asphalt layer removal and cold planing ahead of resurfacing
• Highway and motorway rehabilitation projects
• Airport runway and apron maintenance
• Industrial yard, port and warehouse floor preparation
• Utility trenching and edge trimming on paved surfaces
• Concrete patch removal where a milling drum is used

Each production run is checked at three points: incoming steel certification, in-process dimension checks on shank diameter and washer thickness, and a final visual and hardness spot check before packing. Carbide tips are sampled for braze strength so that batch-to-batch behaviour stays predictable for the operator.

Reference part numbers are listed for fitment guidance only and identify the equipment they replace.

Suzhou Benit Machinery Technology Co., Ltd supplies aftermarket wear and spare parts for road construction equipment: asphalt pavers, cold milling machines and road rollers. The range covers milling teeth, conveyor belts, V-belts, drum toolholders, track pads, rubber tracks, level sensors, shock absorbers and water pumps. Based in Taicang, Jiangsu, the company combines a nearby port with a dense local supply chain, and ships mainly to Europe, the Middle East, Africa and Latin America. Annual sales sit in the USD 4-5 million range, with 80-90% of output exported.

1. Are you a manufacturer? We run our own machining and brazing lines for cutting teeth and act as an OEM supplier for the remaining paver, miller and roller parts.
2. How do I confirm the right pick? Send the machine model, the part number stamped on the old pick, or a photo of the toolholder; we will match the washer thickness and shank type.
3. Can I test before ordering in volume? Yes. Samples are available; sample cost and freight are charged and can be discussed against a follow-up order.
4. What is the minimum order? It varies by item. For this pick the normal MOQ is 100 pcs, and smaller trial lots are possible on request.
5. How fast can you ship? Usually 7-10 working days depending on item and quantity; the sales contact confirms the date with each order.
6. Which payment terms do you accept? T/T, L/C at sight and D/P are accepted; terms are agreed case by case.

Tell us the part number, the quantity you need per month and your destination port, and we will reply with price, packing options and the next available shipment date.

Contact: WhatsApp +86 18262673385  |  Email benit2@szbenit.com